In the last two hundred years there have been great changes in the method of production of goods. This is now also true of the building industry; for mechanization has been introduced. System building can save both time and money. The principle of system building is that the building is made from a set of standard units. These are either made at the building-site or at a factory. Some designers, in fact, are standardizing the dimensions of rooms. They are made in multiples of a single fixed length, usually ten centimeters. This is called a modular system, and it means that manufactures can produce standardized fittings at a lower cost. The most important fact about system building is its speed. A ten-storey flat, for example, can be completed in four months.
There are several new methods of system building. One is the panel method. In this case, the construction company sometimes erects a factory on the site. The walls and floors of the building, called panels, are cast in a horizontal or vertical position. Conduits for electrical wires and sleeves for pipes are cast in the panels when they are being made. The moulds for making these castings are situated all around the building.
After the concrete panels are cast, they are allowed to set and harden for a week. Next they are lifted by a tower crane on to any section of the building. There the panels are cemented together at their joints and the floor covering is laid.
After the panels have been cemented together, the crane lifts a case into the area. It contains all the fittings to be installed, such as wash-basins, radiators and pipes. Finishing tradesmen, such as plumbers, plasterers, painters and electricians, follow behind to complete the work.
In some building developments, in some countries, whole flats with internal features like their bathrooms, bedrooms and connecting stairs, and weighing as much as twenty tons, are carried to the building-site ready-made. A giant overhead crane is used to lift them into position. In the future, this method may become more widespread.
1. The main difference between panel method and the method discussed in the last paragraph is_______.
A. the latter uses ready-made internal features
B. panels are cast in a level position
C. the former is used to build walls and floors while the latter to construct bathrooms or bedrooms
D. the former is more expensive than the latter
2. Which of these statements is TRUE of system building?
A. It employs more men. B. It is difficult and dangerous.
C. It can save both time and money. D. It means less mechanization.
3. According to the passage, the principle of system building is that_______.
A. construction methods are safer
B. buildings are made from a set of standardized units
C. similar buildings can be produced
D. all units are produced on the site
4. The usual fixed length in the modular system is_______.
A. twenty centimeters B. ten millimeters
C. fifty centimeters D. ten centimeters
5. What lifts the concrete panels onto the building?
A. Cranes. B. Man-power.
C. Pulleys. D. Hydraulic jacks.
1. A 2. C 3. B 4. D 5. A
专家点评英语四级作文难度一般
英语四级考试的写作材料:短语和词组(33)
四级阅读准重中常见的四大误区
名师解惑四级写作常见疑难
名师支招:四级写作加分秘诀
推荐:英语四级写作35个加分句型
1995年1月大学英语四级作文题及范文
【作文模板】英语四级作文:叙文的题型
英语四级考试的写作材料:短语和词组(34)
英语四级考试d 写作材料:短语和词组(18)
英语四级考试写作的材料:短语和词组(29)
大学英语四级考试真题范文
大学英语四级作文题及范文
四级写作中应特别注意的常见问题:主谓一致
英语四级考试d 写作材料:短语和词组(28)
1996年1月大学英语作文题及范文
英语四记叙文写作步步走
英语四级考试的写作材料:短语和词组(38)
英语四级考试的写作材料:短语和词组(36)
短文改错几个注意事项
1999年6月大学英语四级作文题及范文
英语四级考试的写作材料:短语和词组(30)
1995年6月大学英语四级作文题及范文
做题规律要遵循:四六级写作的"六项基本原则"
1997年6月大学英语六级作文题及范文
17日四级真题作文范文
英语四级真题作文的点评
大学英语作文题及范文
CET作文评分方法
四级写作必得高分的“六项基本原则”
不限 |
英语教案 |
英语课件 |
英语试题 |
不限 |
不限 |
上册 |
下册 |
不限 |